YOUR HEALTH, I CARE
LASER SERIES
Currently, there is a large amount of basic and clinical research on low-energy laser (LLLT/PBM). However, the power, energy density, irradiation time, wavelength combination, and treatment frequency of different devices can all affect the research results. Therefore, the international community continues to establish more complete standardized clinical evidence. Most studies believe that 660nm and 808nm photobiomodulation technologies, under appropriate parameters, have good safety and application potential. Limei Biotechnology has developed a variety of laser therapy devices to meet the different needs of general users and professional medical professionals, providing the most suitable solutions.
Multi-channel laser and electrical stimulation therapy device Type II
Product Specifications
Laser types: Infrared laser (808nm), Red laser (660nm)
Output waveforms: 1Hz sine wave, 10Hz sine wave, continuous wave (DC)
Output power: 10mw, 30mw, 5mw
Output frequency shield: 1Hz, 10Hz
System Host: Portable system host, including vacuum pump
Standard control interface: LCD neck display screen, independent function key input selection; Emergency stop device: The system host is equipped with an emergency stop button and interlock connector laser output. Two sets
TENS Output: One time setting: 3, 5, 10 minutes; Power Supply Mode: AC power or USB power bank; Power Supply Voltage: Input AC110~220V, Output DC 5Vdc/2A
Unit dimensions: 217mm*196mm*217mm
Main unit weight: 1119g (unit and all accessories: 1816g)
Maximum dimensions of the trolley: 700mm x 390mm x 870mm
Four-channel laser therapy device
Product Specifications
Laser types: Infrared laser (808nm), Red laser (660nm)
Power supply mode: Mains power supply
Voltage: Input AC110~220V
Output DC 12Vdc/2.5A
Dimensions: 217mm*196mm*217mm
Main unit weight: 1119g (unit and all accessories: 1816g)
Laser Specifications
Laser types: Infrared laser (808nm), Red laser (660nm)
Output waveform: Square wave, DC output power: Three-stage adjustable 60mW (max)
Output frequency: Three-stage adjustable 50Hz (max)
System Host: Portable system host, including vacuum pump
Emergency stop device: The system main unit is equipped with an emergency stop button. Laser output: Four sets, with replaceable laser types as needed. Battery device: Dedicated lithium battery (optional).
Power supply type: DC power supply; Voltage/current: 12Vdc / 3Amp
Laser EMS Body Shaping Device
Product Specifications
Laser types: Infrared laser (808nm), Red laser (660nm)
Laser output: Laser belt dimensions (width/depth/height): 250mm / 170mm / 110mm
Weight: Main unit / 0.77kg, Laser belt / 1.1kg
Power Supply Specifications: Power Supply Type: DC Power Supply; Voltage/Current: 12Vdc / 2.5Amp
Laser types: Red laser (660nm) / Infrared laser (808nm)
Output waveform: Continuous wave; Output power: One laser belt contains 5 laser modules.
Each laser module contains 3 laser diodes, and each laser diode has an output power of 50mW.
Hardware operation and control interface: LCD display screen, metal membrane buttons; Emergency stop device: The system host is equipped with an emergency stop button.
ONLY HEALTH IS THE GREATEST WEALTHYOU CAN HAVE IN LIFE
